Hello,
Here is an ATC I made using the digital stamp set Love You to the Bone from Vera Lane Studio.
I used Distress Inks for the background in Spiced Marmalade and Hickory Smoke.
I stamped some bats and a graveyard using black Archival Ink.
I coloured her with Prismacolour markers and fussy cut her out. I used Glossy Accents on her eyes and Stickles on her bow and heart.
I edged around the sentiment with a black Gel pen.
Thanks for having a look.
Talk to ya soon xx
Showing posts with label skulls. Show all posts
Showing posts with label skulls. Show all posts
Monday, September 21, 2015
Sunday, August 30, 2015
Halloween Witch Shaker ATC
Hello,
Here is a shaker ATC I made using the digital stamp set Little Witch from Vera Lane Studio. I made this for the September Halloween Swap in the Vera Lane Studio FB group.
To make the shaker part:
I used 2 ATCs. For the 1st ATC, I simply attached some Halloween paper that has iridescent spider webs on it (set aside)
I cut out a window from a second ATC to make a frame. I coloured it with Distress Inks in Hickory Smoke and Black Soot. Working on the backside of this piece, I attached a piece of acetate and added some foam tape all along the sides to give the confetti some room to move. I added silver, green, and purple confetti for the shaker bits.
I then peeled off the backing to the foam tape and carefully laid the 1st ATC on top.
Flip the right way around and viola!
I coloured her and the crow with Prismacolour markers and fussy cut them out. I added Glossy Accents to her buttons/skull and on the crow's eyes. I used clear Wink of Stella on her hat and eyelids.
I attached them along with an iridescent sticker to the front of the shaker.
I would like to enter this in the following challenges:
Challenge #325: Layers
Check it out here: Cupcake Inspirations
Challenge: Anything Goes
Check it out here: Simon Says Stamp Wednesday Challenge
Challenge #90: Anything Goes
Check it out here: Creative Fingers Challenge
Thanks for having a look.
Talk to ya soon xx
Here is a shaker ATC I made using the digital stamp set Little Witch from Vera Lane Studio. I made this for the September Halloween Swap in the Vera Lane Studio FB group.
To make the shaker part:
I used 2 ATCs. For the 1st ATC, I simply attached some Halloween paper that has iridescent spider webs on it (set aside)
I cut out a window from a second ATC to make a frame. I coloured it with Distress Inks in Hickory Smoke and Black Soot. Working on the backside of this piece, I attached a piece of acetate and added some foam tape all along the sides to give the confetti some room to move. I added silver, green, and purple confetti for the shaker bits.
I then peeled off the backing to the foam tape and carefully laid the 1st ATC on top.
Flip the right way around and viola!
I coloured her and the crow with Prismacolour markers and fussy cut them out. I added Glossy Accents to her buttons/skull and on the crow's eyes. I used clear Wink of Stella on her hat and eyelids.
I attached them along with an iridescent sticker to the front of the shaker.
I would like to enter this in the following challenges:
Challenge #325: Layers
Check it out here: Cupcake Inspirations
Challenge: Anything Goes
Check it out here: Simon Says Stamp Wednesday Challenge
Challenge #90: Anything Goes
Check it out here: Creative Fingers Challenge
Thanks for having a look.
Talk to ya soon xx
Saturday, June 13, 2015
Skull Couple Altered Playing Cards
Hello,
Here are a couple altered playing cards I made using the digital stamp set Love You to the Bone from Vera Lane Studio.
I gessoed both of the cards before I started. I applied 2 colours of Gelatos to each card and sprayed the one side and let it drip.
I coloured all of the images with Prismacolour markers and fussy cut everything out.
I added Glossy Accents to the eyes of the flowers, the 2 hearts on the girl, and both of their eyes as well.
I popped the skull flowers up on foam squares.
I used clear Wink of Stella on his shirt and on her bow.
I added an epoxy heart to the middle of her bow and an epoxy star to the top of the boy's card.
I used Tim Holtz's word stickers for the sentiments.
I added black and white striped washi tape along the bottom of both cards.
I would like to enter this in the following challenge:
Challenge #82: For the Boys **(I'm entering the boy card)**
Check it out here: Left of Center Challenge
Thanks for having a look.
Talk to ya soon xx
Monday, November 17, 2014
Wicked Emily ATC
Hello,
Here is an ATC I made using the digital stamp Emily from CreepieCuteStamps.
Here is an ATC I made using the digital stamp Emily from CreepieCuteStamps.
I coloured her with Prismacolour markers and fussy cut her out.
I used skull and black/white washi tape for the background.
I added Glossy Accents to the skull and bones in her hair.
I added purple gems from Recollections.
I edged around the sentiment with a black Gel pen.
Thanks for having a look.
Talk to ya soon xx
Sunday, November 9, 2014
Skully Claus ATC
Hello,
Here is an ATC I made using the digital stamp Creepy Christmas Santa Claws from The Octopode Factory.
For the background I used a dot embossing folder. I coloured it with Distress Inks in Black Soot and Salty Ocean.
Here is an ATC I made using the digital stamp Creepy Christmas Santa Claws from The Octopode Factory.
For the background I used a dot embossing folder. I coloured it with Distress Inks in Black Soot and Salty Ocean.
I coloured him with Prismacolour markers and fussy cut him out. I used Glossy Accents on the buttons of his coat.
I used skull washi tape along the bottom.
I used Kelly Purkey alphabet letters for the word Xmas. I coloured them with a black Sharpie and added Glossy Accents on top.
I would like to enter this in the following challenge:
Challenge #131: Skully Christmas
Check it out here: Wicked Wednesday ATC Challenge Blog
Thanks for having a look.
Talk to ya soon xx
Thursday, November 6, 2014
Bleeding Skulls Altered Coffin
Hello,
Here is a coffin box from Michaels that I altered. This box plays a spooky laugh when you open it.
Here is a coffin box from Michaels that I altered. This box plays a spooky laugh when you open it.
I started by painting the entire thing with black Gesso. I then sprayed it with Tattered Angels Glimmer spray in Trunk Bay.
I added Tim Holtz’s Crackle paint in brushed pewter to the sides and rubbed it with my finger.
I haven't quite decided what I wanna do to the inside so I left it blank. I painted it with red acrylic paint and covered it with black Gesso. While it was still wet, I rubbed most of the gesso off with a baby wipe.
I bought a bag of skeleton hand from Michaels. I painted one with silver acyrlic paint and hot glued it to the top.
Now for my most favourite part of this project…the bleeding skulls. These skulls were from a bracelet I bought at Michaels that I disassembled. For the blood I used red 3D fabric paint.
Lastly I added a silver foam bat sticker and super sparkly spider to the top.
I would like to enter this in the following challenge:
Challenge #52: Happy Halloween
Check it out here: Left of Center
Thanks for having a look.
Talk to ya soon. xx
Monday, October 27, 2014
Bleeding Skull ATC
Hello,
Here is an ATC I made using some stamps from Hampton Art.
I used Distress Inks in Fired Brick and Seedless Preserves for the background. I then used Fired Brick over a blood drip stencil.
Here is an ATC I made using some stamps from Hampton Art.
I used Distress Inks in Fired Brick and Seedless Preserves for the background. I then used Fired Brick over a blood drip stencil.
I stamped a skull and spider web from a Halloween set from Hampton Art.
The full skeleton is from the $1 bin at Michaels. I stamped him with black Staz On and embossed him in clear.
I used red fabric paint for the blood coming out of the skeleton's eyes.
Thanks for having a look.
Talk to ya soon xx
Wednesday, October 22, 2014
Dia de los Muertos ATC
Hello,
Here is a Day of the Dead ATC I made.
Here is a Day of the Dead ATC I made.
I used Dylusions inks sprays in Cherry Pie and Cut Grass together to get this muddy brownish red background.
I stamped some day of the dead skulls in Hero Arts neon ink.
I added a dancing skeleton.
I put some marigolds along the bottom and edged the sentiment with Distress Ink in black soot.
I would like to enter this in the following challenge:
Challenge #129: Day of the Dead
Check it out here: Wicked Wednesday ATC Challenge Blog
Thanks for having a look.
Talk to ya soon xx
Monday, July 21, 2014
Oddball Art Co. Witch Card
Hello,
I'd like to share a card I made using a digital stamp called Witch Girl on Broom No. 79 from the Oddball Art Co.
Here's a look:
I coloured her with Prismacolour markers and Copics for her skin.
The background paper is from a 12 x 12 pack from Me & My Big Ideas called Trick or Treat. The spiderwebs give off a irresdescent sparkle when they catch the light.
I attached a little die cut spider to her broom and there's a "skull spider" [lol] in the corner.
I dyed the purple mesh ribbon with Dylusions Ink Spray in Crushed Grape and Tattered Angels spray to give it some sparkle.
I went around the sentiment in a silver Gel pen.
I would like to enter this in the following challenges:
Challenge: Show off Those Colouring Skills
Check it out here: Oddball Art Stamps Challenge Blog
TSC Challenge #38: Anything Goes
Check it out here: The Stamping Chef
That's about it...thanks for having a look.
Talk to ya soon xx
I'd like to share a card I made using a digital stamp called Witch Girl on Broom No. 79 from the Oddball Art Co.
Here's a look:
I coloured her with Prismacolour markers and Copics for her skin.
The background paper is from a 12 x 12 pack from Me & My Big Ideas called Trick or Treat. The spiderwebs give off a irresdescent sparkle when they catch the light.
I attached a little die cut spider to her broom and there's a "skull spider" [lol] in the corner.
I dyed the purple mesh ribbon with Dylusions Ink Spray in Crushed Grape and Tattered Angels spray to give it some sparkle.
I went around the sentiment in a silver Gel pen.
I would like to enter this in the following challenges:
Challenge: Show off Those Colouring Skills
Check it out here: Oddball Art Stamps Challenge Blog
TSC Challenge #38: Anything Goes
Check it out here: The Stamping Chef
That's about it...thanks for having a look.
Talk to ya soon xx
Saturday, July 12, 2014
Wicked Witch Birthday Card
Hi everyone,
For this wicked witch card, I ended up altering an image from The Octopode Factory.
I used the Devil Girl digital stamp but I cut off her pitchfork and horns. I added a witch hat [freebie from the Octopode blog] and skull.
Here's a look:
She is popped up on foam dots and is coloured with Prismacolour markers.
The skull and crossbones ribbon is from Michaels and so are the 3d skull stickers. The bottle of poison is a Martha Stewart epoxy sticker that I bought last Halloween.
There are a bunch of spooky words printed on the background scrapbook paper and I stamped tiny skulls onto some plain purple paper.
My favourite part of the card is her glittery "skull stick" :D
The sentiment says 'have a wicked birthday' and I think it fits well with her.
I'm entering this in the Punk you Girl Challenge 14: Skeletons and Secrets
Check it out here: Punkyou Girl
That's about it...thanks for having a look.
Talk to ya soon xx
For this wicked witch card, I ended up altering an image from The Octopode Factory.
I used the Devil Girl digital stamp but I cut off her pitchfork and horns. I added a witch hat [freebie from the Octopode blog] and skull.
Here's a look:
She is popped up on foam dots and is coloured with Prismacolour markers.
The skull and crossbones ribbon is from Michaels and so are the 3d skull stickers. The bottle of poison is a Martha Stewart epoxy sticker that I bought last Halloween.
There are a bunch of spooky words printed on the background scrapbook paper and I stamped tiny skulls onto some plain purple paper.
My favourite part of the card is her glittery "skull stick" :D
The sentiment says 'have a wicked birthday' and I think it fits well with her.
I'm entering this in the Punk you Girl Challenge 14: Skeletons and Secrets
Check it out here: Punkyou Girl
That's about it...thanks for having a look.
Talk to ya soon xx
Subscribe to:
Posts (Atom)