Sunday, August 30, 2015

Halloween Witch Shaker ATC

Hello,

Here is a shaker ATC I made using the digital stamp set Little Witch from Vera Lane Studio. I made this for the September Halloween Swap in the Vera Lane Studio FB group.

To make the shaker part:
I used 2 ATCs. For the 1st ATC, I simply attached some Halloween paper that has iridescent spider webs on it (set aside) 
I cut out a window from a second ATC to make a frame. I coloured it with Distress Inks in Hickory Smoke and Black Soot. Working on the backside of this piece, I attached a piece of acetate and added some foam tape all along the sides to give the confetti some room to move. I added silver, green, and purple confetti for the shaker bits. 
I then peeled off the backing to the foam tape and carefully laid the 1st ATC on top. 
Flip the right way around and viola!

I coloured her and the crow with Prismacolour markers and fussy cut them out. I added Glossy Accents to her buttons/skull and on the crow's eyes. I used clear Wink of Stella on her hat and eyelids.

I attached them along with an iridescent sticker to the front of the shaker. 

I would like to enter this in the following challenges:

Challenge #325: Layers
Check it out here: Cupcake Inspirations

Challenge: Anything Goes
Check it out here: Simon Says Stamp Wednesday Challenge

Challenge #90: Anything Goes
Check it out here: Creative Fingers Challenge

Thanks for having a look.

Talk to ya soon xx

8 comments:

  1. Super cute!!! Thank you for joining us at Cupcake Inspirations, good luck!!! Amy DT

    ReplyDelete
  2. love that it's a shaker card - thanks for joining us at Cupcake Inspirations

    ReplyDelete
  3. Wonderful shaker ATC Judy! The image is so cute and I love the pretty sparkle.
    Thanks for joining us at Simon Says Stamp Wednesday Challenge
    Mandy xx

    ReplyDelete
  4. Just love this! The added sparkle looks spectacular! So glad you were inspired by Cupcake Inspirations' layers challenge! Hope to see you again!
    Debbie, DT Sweetie

    ReplyDelete